Tikkurila Temalac ML90

SKU
ID23883
UN1263 (Class: 3, Pk Grp: III)
A rapid drying, high gloss topcoat for use on steel surfaces.
Available in 3 and 10 Litres
From £46.14 £38.45
In stock
Only %1 left
Product Description

Tikkurila Temalac ML90 is a single component high gloss topcoat suitable for  industrial finishing. This easy to apply product gives a high quality appearance and is ideal when there is a high demand for colour and gloss retention.

Best Uses

Temalac ML90 is for use on steel surfaces and is ideal on agricultural machinery, small tanks, haulage equipment and other machinery and equipment.

Application

Temalac ML90 can be applied using a "wet-on-wet" painting technique. Application is by either conventional or airless spray, or by brush.

All surfaces should be clean and dry before application. Remove all oil, grease, salt and dirt by appropriate means and repair any damage to the primer coat.

The best finish is obtained using a "wet-on-wet" technique, with 5-30 minutes evaporating pauses.

Suitable Primers

Technical Details
Components: Single Pack
Type: Solvent Based
Finish: Full Gloss
Stock Colours: White
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 460 g/l
Volume Solids: 45 ± 2 volume %
Suitable Substrates: Metal
Application Method: Brush, Airless Spray or Conventional Spray
Theoretical Coverage: 11m/litre @ 20µm
Wet Film Thickness (WFT): 90 µm
Dry Film Thickness (DFT): 40 µm
Induction Time: -
Pot Life: -
Touch Dry: 5 hours at 23°C
Overcoatable: 24 hours at 23°C
Cleaner / Thinner: Thinners 1006 and 1050 
Shelf Life: See tin for shelf life and storage information
Packaging: Available in 3 and 10 Litres

Related Products