Tikkurila Fontefacade SC10 / SC50

SKU
ID23791
Non Hazardous
Water-based, single pack, fast drying acrylate exterior single coat paints for mineral masonry.
Available in 20 Litres
From £393.41 £327.84
In stock
Only %1 left
Product Description

Tikkurila Fontefacade SC10 and SC50 are water-based, single pack, fast drying acrylate exterior single coat paints for mineral masonry.

Best Uses

Tikkurila Fontefacade SC10 and SC50 are suitable for exterior mineral substrates such as fibre cement flat sheets. This mineral masonry paint is ideal for use in shop on fast production lines, for drying in elevated temperature as well as in room temperature.

Tikkurila Fontefacade SC10 and Tikkurila Fontefacade SC50 provide good weather resistance properties. This mineral masonry paint can be used as a primer and a top coat.

Available in Matt (SC10) and Semi Gloss (SC50).

Application

Thoroughly mix the paint prior to use. Ensure the substrate is clean and dry ready for paint. Apply via airless spray or air-assisted airless spraying.

For airless spraying, recommended nozzle tip is 0.015"–0.019" and pressure 80–160 bar. Spray angle shall be chosen according to the shape of the object.
For air-assisted airless spraying, recommended nozzle tip is 0.015"–0.019" and pressure 80–160 bar. Atomising air pressure should be about 1–3 bar. Spray angle shall be chosen according to the shape of the object.

Technical Details
Components: Single Pack
Type: Water Based
Finish: SC10 is Matt, SC50 is Semi Gloss
Stock Colours: White, Black
Tintable: Yes, to most NCS, Tikkurila colours, RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 10 g/L for SC10 40 g/l for SC50
Volume Solids: 48% for SC10, 43% for SC50
Suitable Substrates: Suitable for exterior mineral substrates such as fibre cement flat sheets.
Application Method: Airless spraying and air-assisted airless spraying.
Theoretical Coverage: 3 - 9 m2 per litre
Wet Film Thickness (WFT): 150 - 300 g/m2
Dry Film Thickness (DFT): 90 - 160 microns
Induction Time: -
Pot Life: -
Dry To Handle: 15 minutes at 23°C
Overcoatable:  
Fully Cured: 3 - 4 days at 20°C
Cleaner / Thinner: Water. Paint is recommended to be used without thinning. If needed thin with water max. 2%. Thinning will slow down drying times.
Shelf Life: See container.
Packaging: Available in 20 Litres

Related Products