Tikkurila Luja Finishing Paint 7 / 20 / 40

Non Hazardous
A water based acrylate interior wall and ceiling paint that will protect against mould. LUL APR No.2447
Available in 3 and 10 Litres
From £60.58 £50.48
In stock
Only %1 left
Product Description

Tikkurila Luja Finishing Paint is a water based acrylate interior wall and ceiling paint that will protect against mould.

London Underground Approval No.2447.

Best Uses

Tikkurila Luja Finishing Paint is ideal as an internal wall and ceiling paint for communal areas, hospitals and the food industry. Because of Luja's mould resistant properties, it is ideal for surgeries, care homes, vets and areas with high use such as staircases, lobbies, and corridors.

Available in 3 finishes:

  • Tikkurila Luja Finishing Paint 7 - Matt
  • Tikkurila Luja Finishing Paint 20 - Semi Matt
  • Tikkurila Luja Finishing Paint 40 - Semi Gloss

Provides very good wash resistance against cleaning detergents and disinfectants used in hospitals. Tikkurila Luja will also resist solvents such as white spirit.


Prepare onto a clean, degreased surface. Wash down previously painted surfaces with Tikkurila Cleaning Agent (Maalipesu). Remove loose, flaking paint with a scraper. Sand hard, glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable Tikkurila Presto Filler. Sand the filler and remove sanding dust. Prime with Tikkurila Luja Universal Primer or Tikkurila Varma Primer, if necessary. Apply via brush, roller or airless spray.

Technical Details

Approvals and Certifications

  • London Underground Approved No.2447 - Tikkurila Luja Finishing Paint and Tikkurila Luja Universal Primer: A waterborne acrylic finishing paint for plaster and various masonry substrates, for interior use in stations, surface and below ground, and also in depots.
  • London Underground Approved No.2448 - A waterborne acrylate latex finishing paint for metal surfaces primed with Tikkurila Rostex Super Akva. For general use in stations, surface and below ground, and in depots.
  • Wet-scrub resistance SFS-EN 13300 class I, ISO 11998
  • Heat resistance 85°C , ISO 4211-2 and ISO 4211-3
  • Marine Equipment Directive (MED) B7151 Approved

Technical Info

Components: Single Pack
Type: Waterbased
Finish: Matt, Semi Matt, Semi Gloss
Stock Colours: White, Magnolia, Black
Tintable: Yes, to most Tikkurila, NCS, RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 30 g/L
Volume Solids: 40%
Suitable Substrates: Interior painting of concrete, plaster, filler treated, brick, cardboard, chipboard and wood fibre board surfaces. Suitable for both new and previously painted surfaces.
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: Approx 5 - 8m2 per litre
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 23°C
Overcoatable: 4 hours at 23°C
Fully Cured:  
Cleaner / Thinner: Water
Shelf Life: See container
Packaging: Available in 3 and 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use