
Tikkurila Temal 600HB
Tikkurila Temal 600HB is a high build silicone-aluminium paint for use in areas that demand a heat resistant product. Resistant to temperatures up to +650ºC dry heat on steel without primer, and +400ºC when applied over a zinc silicate paint.
Best Uses
Temal 600HB is ideal for use on exterior steel structures that are exposed to high temperatures. It is also suitable for sauna stoves, fireplace doors, flues, exhaust pipes and other hot metal surfaces.
Application
Application is by either conventional or airless spray, or by brush. All surfaces should be clean and dry before application.
Steel surfaces should be blast cleaned to grade Sa2½ (ISO 8501-1). If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
The surface temperature of the steel should remain at least 3°C above the dew point. Good ventilation and sufficient air movement is required in confined areas during both application and drying.
Zinc silicate surfaces should have all oil, grease, salt and dirt removed from the surface by appropriate means. Ensure that you repair any damage to the primer coat. Note the overcoating time of the primer (ISO 12944-4).
Recommended Primer
Tikkurila Temasil 90.
| Components: | Single Pack |
| Type: | Solvent Based |
| Stock Colours: | Aluminium |
| Tintable: | No |
| Suitable Substrates: | Metal |
| Cleaner / Thinner: | Thinner 1006 |
| Shelf Life: | See tin for shelf life and storage instructions |
| Packaging: | Available in 10 Litres |
| VOC Content: | 565 g/l |
| Application Method: | Airless Spray, Brush, Conventional Spray |
| Theoretical Coverage: | 13m per litre |
| Finish: | Matt, Metallic Lustre |
| Touch Dry: | 15 mins at 23 °C |
| Fully Cured: | Final cure and hardness will be obtained by curing at +230ºC, 1 hour |
| Volume Solids: | 34±2% |
| Overcoatable: | 2 hours at 23°C |
| Wet Film Thickness (WFT): | 75µm |
| Dry Film Thickness (DFT): | 25µm |

