Tor Tortread SP Floor Paint

SKU
id360
UN1263 (Class: 3, Pk Grp: III)
A single pack urethane alkyd floor paint offering slip resistance and ease of cleaning.
Available in 5 Litres
From £63.10 £52.58
In stock
Only %1 left
Product Description

Tortread SP Floor Paint is a Single Pack Urethane Alkyd Floor Paint offering slip resistance and ease of cleaning. Tortread is a light duty floor coating for use in warehouses, factories, workshops, garages, showrooms etc. 

Tortread is a tough urethane alkyd binder pigmented with inert inorganic pigments and is thinned with White Spirit. Available in a range of colours including, yellow, green and tile red. Tortread is easy to use, quick drying and offers good resistance to abrasion, oil and grease.

Best Uses

Tortread is best used in warehouses, factories, workshops, garages and showrooms. With an anti-slip option available, Tortread SP is a high quality product that provides you with an easy to apply, cost effective surface and good wear resistance. Best used in areas where a light-duty floor coating is required.

Application

Tortread SP Floor Paint should be applied using a short pile paint roller or airless spray. Two coats of Tortread are the usual requirement but in some cases you may only require one. Tortread is touch dry within 2 hours and hard dry, usually within 16 hours. When overcoating Tortread, wait a minimum of 8 hours and leave the reapplication for no longer than 7 days.

Surface and Environment

Tortread is a light duty floor coating for use in areas such as warehouses, factories, workshops, garages and showrooms. Ensure all surfaces are clean, sound, dry and free from oil grease, grime and other surface contaminants. Tortread will withstand pedestrian and light rubber wheeled vehicular traffic and is not suitable for heavy duty use or in high humidity areas such as shower rooms, swimming pools etc.

Technical Details

Notes

  • Tortread SP is a Single Pack Urethane Alkyd Floor Paint offering slip resistance and ease of cleaning
  • A tough urethane alkyd binder pigmented with inert inorganic pigments and thinned with White Spirit
  • Ideally suited for light use in warehouses, factories,work shops, garages, showrooms etc.

Technical Info

Components: Single Pack
Type: Urethane alkyd
Finish: Semi Gloss
Stock Colours: Black, Red, Mid Grey, Green, 08E51, 00A05, 18E53
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: max 500 g/l
Volume Solids: 47+/-2%
Suitable Substrates: Flooring
Application Method: Preferred short pile roller but can be airless sprayed
Theoretical Coverage: 10 square metres per litre per coat
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: N/A
Touch Dry: 4 hours at 20°C
Overcoatable: After minimum 8 hours to a maximum of 7 days at 20°C
Hard Dry: Within 16 hours
Cleaner / Thinner: Tor TH10
Shelf Life: 2 years in unopened containers
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use