Torprufe EMF is an elastomeric water based masonry paint coating for walls, providing decoration and weatherproofing for exterior masonry.
Torprufe EMF Masonry System is an elastomeric water based masonry paint system for walls, designed for high performance decoration and weatherproofing of exterior masonry. EMF is available in 5 litre paint tins and a wide range of different colours.
Torprufe EMF Masonry System is best used to provide high elasticity and high solid content, in order to permit effective bridging of hairline cracks. Torprufe also provides excellent breathability without flaking, peeling or cracking, whilst offering a high level of resistance to biological attack.
Always ensure that surfaces are clean, dry and free from contaminants before starting the application process. After the Sealer has been applied and dried, use a brush or roller to apply 2 coats of EMF.
Surface and Environment
The EMF Masonry Paint System has been specifically designed for the high performance protection of all types of external masonry, cement, concrete and cementitious renders. Torprufe can be used in various environments and on a variety of buildings, including; High rise Housing Blocks, Car Park Structures, Commercial Buildings, Residential Housing and any other building that requires long term masonry protection.
Please call for further information on Torprufe.
- Torprufe EMF is an elastomeric water based coating system
- Torprufe EMF is designed for high performance decoration and weatherproofing of exterior masonry
- Its high elasticity and high solids content permits effective bridging of hairline cracks
- Breathabilty stops flaking or cracking
- High level of resistance to biological attack
|Stock Colours:||White, Magnolia|
|Tintable:||Yes to selected colours. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||Below 25g/litre|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||9 metres squared per litre (smooth surfaces)|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||60 microns minimum dft per coat (apply two coats)|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After minimum 3 hours at 20°C|
|Hard Dry:||3 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years in unopened containers at moderate temperatures (frost free)|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.