Zinga Zingaceram HS is a high specification, 2 pack, anti corrosion intermediate MIO coat as a sealer over Zinga for steel structures at risk from severe abrasion, chloride and chemical exposure.
Zingaceram Hs provides a durable, chemical resistant coating suitable for both structural steelwork and sub sea pipelines. Curing to give a grey finish, Zingaceram HS is normally used on top of a base of Zinga as a unique epoxy primer. Its pigmentation is comprised of both ceramic fillers and micaceous iron oxide (MIO) flakes that form over 200 layers of metallic platelets throughout the dried film. These platelets act as both moisture and salt barriers.
When the waiting time between the successive coats is abnormally prolonged or in extremely polluted areas, the Zinganised surface can become contaminated. All contaminations that hamper the adhesion of the paint should be removed by appropriate means. Salt deposits or other water-soluble contaminations should be
removed with water and brush, water under high pressure or steam. Possible white rust on ZINGA should be removed with water and rigid nylon brush.
Do not apply with a humidity over 85%. Do not apply on a damp or wet surface. Zinga EP Thinner HS should be used for spray application. Surface temperature should be 3°C and 60°C. Zingaceram HS can be applied on top of ZINGA by brush and roller or conventional spray-gun or by airless spraying. Dilute 10-15% with Zinga EP Thinner HS.
- Dilute 10-15% with Zinga EP Thinner HS
|Type:||Epoxy resins pigmented with micaceous iron oxide and ceramic fillers, cross linked with a phenalkamine hardener|
|VOC Content:||196.0g per Litre|
|Suitable Substrates:||Zingaceram HS can be applied on top of ZINGA|
|Application Method:||Brush, Roller, Conventional Spray or Airless Spray|
|Theoretical Coverage:||13 m2 per litre at 60 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||60 - 120 microns|
|Pot Life:||2.5 - 3 hours at 20°C|
|Touch Dry:||6 hours at 20°C|
|Overcoatable:||8 hours after touch dry at 20°C|
|Fully Cured:||18 hours at 20°C. Fully resistant after 7 days at 20°C|
|Cleaner / Thinner:||Zinga EP Thinner HS|
|Shelf Life:||1 year unopened|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.