£7.75 delivery on orders excluding certain products & postcodes *
Axalta ViterLac PU90 Finish
SKU
ID24067
UN1263 (Class: 3, Pk Grp: III)
A general purpose high gloss finish for Structural Steel.
Available in 5 Litres in RAL 9005 Jet Black.
From
£68.04
£56.70
In stock
Only %1 left
Product Description
Axalta ViterLac PU90 Finish is a general purpose, fast air drying, urethane alkyd gloss finish, for structural steel and the ACE market.
Best Uses
ViterLac PU90 Finish is ideally suited for use on structural steel which has been suitably primed with selected ViterPrime primers. It is also suitable for use in the ACE market on items including agricultural machinery and earth moving equipment. ViterLac PU90 Finish is not suitable for immersion.
Application
The recommended application method is by Airless Spray, Conventional Spray or Brush. Axalta ViterLac PU90 Finish, should only be applied in conditions of good ventilation (which must be maintained during drying and curing). Do not apply when rain, mist, sleet or snow are imminent. During the application and drying time of the paint coating, the surface should remain dry, with the relative humidity not exceeding 85%.
Ensure that the product is thoroughly mixed by using a mechanical agitator before use, and continue to agitate periodically to ensure the paint remains homogeneous.
Surface and Environment
Axalta ViterLac PU90 Finish should be applied over an appropriate primer and/or intermediate coat. All surfaces to be coated should be dry and cleaned to remove all oil, grease, salts, weld flux or other contamination.
Technical Details
Features and Benefits
- Good gloss and gloss retention, with good weathering and durability
- Fast air drying
- Ideally suited for the finishing of structural steel over selected ViterPrime primers (see Product Notes)
- May be used on agricultural machinery and earth moving equipment (ACE market)
Technical Info
| Components: | Single Pack |
| Type: | Urethane Alkyd |
| Finish: | Gloss |
| Stock Colours: | RAL 9005 Jet Black |
| Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 441 + 20 g/litre (varies with colour) |
| Volume Solids: | 40 ± 2% (varies with colour) |
| Suitable Substrates: | Steel |
| Application Method: | Brush, Airless Spray or Conventional Spray |
| Theoretical Coverage: | 16.0 m2/litre |
| Wet Film Thickness (WFT): | 62 µm |
| Dry Film Thickness (DFT): | 25 µm |
| Induction Time: | - |
| Pot Life: | - |
| Dust Free: | 1-2 hours at 23°C |
| Overcoatable: | May be overcoated with itself or other white spirit based paints before 4 hours or after a minimum of 24 hours at 23°C |
| Hard Dry: | 16 hours at 23°C |
| Cleaner / Thinner: | 1050 Thinner or 1006 Thinner for spraying |
| Shelf Life: | 12 months from date of production unopened |
| Packaging: | Available in 5 Litres |
