Blackfriar Anti-Slip Floor Paint

SKU
ID3843
UN1263 (Class: 3, Pk Grp: III)
A tough, durable, high opacity floor coating, contains special aggregates for outstanding slip resistance.
Available in 2.5 or 5 Litres
From £36.49 £30.41
In stock
Only %1 left
Product Description

Blackfriar Anti Slip Floor Paint for concrete, wood, metal, plastic, etc. Suitable for foot traffic and domestic / light industrial use.

Best Uses

Blackfriar Anti Slip Floor Paint is part of the anti slip products range available from Promain. This anti slip floor paint gives a cost effective solution to increasing safety levels, ideal for anything from small maintenance projects to large projects such as steps, ramps, boat decks and walkways. Turn concrete, wood, metal, plastic, etc. into a textured non slip surface.

Application

Blackfriar Anti Slip Floor Paint can be applied using brush or roller to produce a semi-gloss, aggregated finish that is virtually un-slippable, even in wet conditions. Blackfriar Anti Slip Floor Paint has a theoretical coverage rate of 6-10m2 per coating and is touch dry in 4-6 hours at 20°C.

Surface and Environment

Blackfriar Anti Slip Floor Paint is ideal for use in a number of industrial environments internally and externally, and can be used on a variety of different surfaces including, concrete, metal, tiles, wood and masonry surfaces. This paint has been specially formulated for use in foot and light traffic areas and is available in a selection of decorative colours for an aesthetically pleasing finish. 

Technical Details

Features

  • A tough, durable, high opacity floor coating
  • Contains special aggregates for outstanding slip resistance
  • Suitable for concrete, masonry, tiles, wood and metal surfaces
  • Specially formulated for foot and light traffic areas
  • Aggregated finish for total slip-resistance
  • Indoor and outdoor use

Technical Info

Components: One Part
Type: Solvent based
Finish: Semi Gloss
Stock Colours: Black, Green, Light Grey, Mid Grey, White
Tintable: No
VOC Content: 325.0g per Litre
Volume Solids: -
Suitable Substrates: For indoor and outdoor use on concrete, cement, wood, metal and stone surfaces
Application Method: Brush, Roller
Theoretical Coverage: 6 - 10 m2 per litre per coat. Two coats recommended
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 4 - 6 hours at 20°C
Overcoatable: After 16 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Blackfriar Brush Cleaner or White Spirit
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 2.5 and 5 Litres
Product Data Sheet (555.05 kB)
Safety Data Sheet (172.11 kB)

Related Products