Blackfriar Oil Tolerant Primer, 5 Litres

SKU
id3851
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: III)
Designed for application over cleaned concrete floors and screeds where traces of residual Professional Oil contamination are still present.
Available in 5 Litres
£162.71 £135.59
In stock
Product Description

Blackfriar Oil Tolerant Primer is a 2 pack, virtually solvent free product, designed for application over cleaned concrete floors and screeds where traces of residual Professional Oil contamination are still present. It can also be applied to new concrete surfaces which have been allowed to fully cure.

Best Uses

Blackfriar Oil Tolerant Primer is ideal for use on floors where a level of contamination has been left untreated and works to seal the oil or residue into the surface prior to overcoating.

  • Designed for use over cleaned concrete floors
    and screeds.
  • Tolerates all types of residual oil contamination.
  • Can also be applied to new, fully cured concrete.
  • Indoor and outdoor use.

Blackfriar Oil Tolerant Primer can be used over all types of oil stain and grease and works to provide a high quality, adhesive coating that allows decorative and protective overcoating to adhere properly to the surface without the oil affecting the performance.

Application

Ensure the surface to be painted is integrally sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed.

Stir base thoroughly before adding all of the activator then mix well. DO NOT MIX PART UNITS. Discharge
immediately after mixing. Pot life is 20-30 minutes at 20°C. Apply with a brush, squeegee or roller working the paint in any surface imperfections. If necessary de-aerate using a spiked roller within 20 minutes of application. Reasonably low profiled surfaces can usually be treated with one full coat of Blackfriar Professional Oil Tolerant Primer applied a 5m2/L. Porous or uneven surfaces will require more material.

Rough or undulating surfaces should receive at least two coats of Blackfriar Professional Oil Tolerant Primer to
ensure high spots are fully protected. Do not apply at
surface temperatures below 10°C or if overnight ambient temperatures are below 5°C.

Technical Details
Components: One Part
Type: Solvent Based
Finish:  
Stock Colours: Clear
Tintable: No
VOC Content: 500.0g per Litre
Volume Solids:  
Suitable Substrates: For concrete floors and screeds
Application Method: Brush, Squeegee, Roller
Theoretical Coverage: Up to 5m2 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: 20 - 30 minutes at 20°C
Touch Dry: 6 - 16 hours at 20°C
Overcoatable: After 16 hours, Before 48 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Xylene
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use