Please note, this product has a 21 day lead time for delivery.
Centrecoat Flexicoat is an external water based smooth, premium masonry paint with added P.T.F.E. Utilises increased flexibility & dirt resistance to help protect against harsh weather conditions & increased dirt pollution.
Centrecoat Flexicoat utilises a tough acrylic binder system to give a durable hard wearing matt finish with superb opacity giving great depth of colour. For exterior application to brick, cement and plaster as a smooth premium masonry paint.
Apply using brush, roller, HVLP or airless spray. All surfaces to be coated must be clean, dry and free from any contaminants including dirt, algae, grease and loose or flaky paint. Loose or flaky paint can occur after painting has begun if painting over previous weak paint layers, to avoid this sand back any weak paint layers before painting commences.
If repairs are needed to be made use fillers of same porosity and density as main substrate, this will help achieve a uniform finish and reduce any chance of visible differences in colour or tone. Follow manufacturers instructions regarding application guides and drying times. If the wall/floor to be painted is uneven or highly porous then a priming/mist coat may need to be applied. Apply a priming/mist coat by diluting with approximately 10% of clean water by weight.
It is important to note that highly porous surfaces that are not properly prepared can cause difficulties during application and may lead to an uneven colour finish.
If using more than one tin, check that the batch numbers of each tin match, if batch numbers vary ensure you intermix tins before use. Ensure to stir all tins thoroughly before use. Before full application paint out a small test patch and allow to dry to ensure colour satisfaction. Apply only when temperatures are above 5ºC, failure to observe minimum temperature will result in poor film formation and poor adhesion.
|Tintable:||Yes, to pastel shades. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For exterior application to brick, cement and plaster.|
|Application Method:||Brush , Roller, HVLP Spray & Airless spray|
|Theoretical Coverage:||10 m2 per litre per coat|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Surface Dry:||2 hours at 20°C depending on airflow and humidity.|
|Overcoatable:||12 hours @ 20° depending on airflow and humidity.|
|Cleaner / Thinner:||Water|
|Shelf Life:||12 months in unopened containers|
|Packaging:||Available in 5 and 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.