MMA Freezer Grade Clear Sealer is a two pack, ultra fast curing sealer for use as the finish coat for MMA flooring products in the Centrecoat MMA FG range. Hygenic and easily cleaned for use in cold rooms such as refrigeration chambers and cold temperature storage.
The application of a clear sealer coat is recommended to reduce any tendency towards staining and dirt pick up, and thereby ensure optimum ease of cleaning of Centrecoat's Freezer Grade Methyl Methacrylate resin floor system.
Centrecoat MMA FG Clear Sealer is formulated for use as a sealer for Centrecoat MMA FG Deck Coat. Suitable for cold rooms such as refrigeration chambers, cold chambers, cooler chambers, restaurant cold storage, food cold rooms, industrial freezers, restaurant freezers, cold temperature storage, refrigerators in commercial premises and commercial beverage coolers.
- Ultra fast curing
- Easy to apply
- Chemical and abrasion resistant
- Hygienic and easily cleaned
- Thermal shock resistant
- Excellent resistance to dilute acids and alkalis, oil, petrol, diesel, vegetable oils and fruit juices
Previously applied Centrecoat MMA FG systems should have been allowed to cure for at least 1 hour at 20°C. Centrecoat MMA FG is supplied as a two pack
material consisting of: a BASE component and a CATALYST component. Add the CATALYST component to the BASE component and mix thoroughly, preferably by mechanical means.
Apply by short nap perlon, or smooth lambswool rollers, at a nominal rate of 0.3 – 0.6kg/m2, depending on surface profile. NOTE: a second coat applied at the same rate is recommended where aggressive chemicals or heavy wear will be encountered.
Clean equipment immediately after use using Centrecoat MMA Tool Cleaner.
|Suitable Substrates:||For use over other Centrecoat MMA FG products in freezing temperatures down to -25°C|
|Application Method:||Short Nap Perlon or Smooth Lambswool Roller|
|Theoretical Coverage:||0.3 - 0.6 Kg per m2 depending on surface profile.|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Pot Life:||15 minutes at 20°C|
|Light Foot Traffic:||1 hour at 20°C|
|Vehicular Traffic:||2 hours at 20°C|
|Full Chemical Resistance:||24 hours at 20°C|
|Cleaner / Thinner:||Clean equipment immediately after use using Centrecoat MMA Tool Cleaner.|
|Shelf Life:||Store in cool dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C. Adequate ventilation of the storage area should be provided. Keep containers tightly closed when not in use. Centrecoat MMA FG Clear Sealer has a minimum shelf life of 6 months when stored in original, unopened containers, in accordance with manufacturer’s instructions.|
|Packaging:||Available in 5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.