Teamac Chassis Black

UN1263 (Class: 3, Pk Grp: III)
A fast drying anti-corrosive coating offering good durability and protection to metal surfaces.
Available in 5 Litres in Black
£61.33 £51.11
In stock
Product Description

Coo-Var Chassis Black is an anti-corrosive coating which offers good durability and protection to metal vehicle chassis. Available in a semi-gloss finish direct to metal surfaces.

Best Uses

Coo-Var Chassis Black is a fast drying coating which is best used on the chassis of cars, trailers, trucks and buses etc.

Technical Details


  • Anti-corrosive.
  • Good durablity and protection to metal surfaces.
  • Solvent is Xylene.
  • Recommended primer is Teamac Rapidry Zinc Phosphate Primer P/218.

Technical info

Components: Single Pack
Type: Modified Alkyd
Finish: Semi Gloss
Stock Colours: Black
Tintable: No
VOC Content: -
Typical Total Solids: 52% by weight
Suitable Substrates: Metal Surfaces, Structural Steel
Application Method: Spray, small areas may be be brushed
Theoretical Coverage: 10 m2 / Litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Surface Dry: 30 minutes at 20°C
Thorough Dry: After 4 hours at 20°C
Fully Cured: days at 20°C
Cleaner / Thinner: V/607/16
Shelf Life: -
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use