Coo-Var Aluminium Solar Reflecting Paint is a solvent based paint for use on flat roofs suitable for stable roofing felt, concrete wood and brick in areas that are exposed to regular sunlight.
Coo-Var Q253 Aluminium Solar Reflecting Paint is designed to reflect and dissipate heat and sunlight from roofs. Coo-Var Solar Reflective Paint is available in 5 and 25 Litre Tubs. When used Q253 gives a highly reflective, oil based, silver metallic sheen.
Coo-Var Q253 Aluminium Solar Reflecting Paint is best used for reflecting UV light and heat from roofs to protect the roof itself and protect for over heating internally also. Inside can become stuffy and hot and by applying this Solar Reflective Paint you will be helping to protect a buildings internals from heat build up.
Coo-Var Q253 Aluminium Solar Reflecting Paint can be applied using brush, roller or spray like a lot of other paint products. For larger surface areas, we would recommend using spray or roller and using brush for smaller trickier areas. After 3 hours the paint will be touch dry and reach full hardness in 5-7 days.
Coo-Var Q253 Aluminium Solar Reflecting Paint is designed for use on Roofs and can be used on stable roofing felt, concrete wood and brick in environments that are exposed to sunlight on a regular basis.
|Finish:||High Reflective Sheen|
|VOC Content:||450.0g per Litre|
|Suitable Substrates:||For stable felt, concrete, wood and brick|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||10.5 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||120 microns|
|Dry Film Thickness (DFT):||45 - 50 microns|
|Touch Dry:||3 hours at 20°C|
|Overcoatable:||After 12 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Do not thin. Coo-Var Thinners 14|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 and 25 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.