*Sherwin Williams Acrolon C750V2 Acrylic Epoxy Finish - Formerly Leighs

SKU id9205 ***
This product is now discontinued.

Product Description

Please note, this product is now discontinued. Please contact our technical team for a suitable alternative.

Sherwin Williams Acrolon C750V2 - Formerly Leighs is a isocyanate free, two pack epoxy, acrylic binder finish for exterior exposed surfaces where retention of gloss is required.

Best Uses

Sherwin Williams Acrolon C750V2 is best suited for when the use of isocyanate products is precluded or undesirable, such as highways applications. Normally used in conjunction with Sherwin Williams epoxy primers and undercoats.

Application

Compatible with a wide range of Macropoxy, Dura-plate, Zinc Clad Epoxy Primers and Buildcoats. Sherwin Williams Acrolon C750V2 must be applied over epoxy materials within 4 days at 23°C to ensure satisfactory intercoat adhesion.

Ensure surfaces to be coated are clean, dry and free from all surface contamination. Recommended application method via airless spray, brush or conventional spray. Use Sherwin Williams Thinner No 5. This material should preferably be applied at temperatures in excess of 10°C. In conditions of high relative humidity, ie 80-85% good ventilation conditions are essential.

Substrate temperature shall be at least 3ºC above the dew point and always above 0°C. Topcoats not normally required but indefinitely overcoatable with itself and other high performance topcoats.

Recommended Products To Use


Sherwin Williams Macropoxy 646 Epoxy Primer Finish

Sherwin Williams Macropoxy 646 Epoxy Primer Finish

A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance p...

Regular Price: £425.36

Special Price Excl. VAT: £354.46 Incl. VAT: £425.35

Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer

Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer

A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

£131.25 (£157.50 Inc VAT)
*Sherwin Williams Zinc Clad IV 80% Epoxy Zinc Rich Primer

*Sherwin Williams Zinc Clad IV 80% Epoxy Zinc Rich Primer

This product is now discontinued.

£201.60 (£241.92 Inc VAT)
Sherwin Williams Zinc Clad IV EU Formerly M501

Sherwin Williams Zinc Clad IV EU Formerly M501

An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.

Regular Price: £332.44

Special Price Excl. VAT: £153.30 Incl. VAT: £183.96

Sherwin Williams Cleanser Thinner No 5

Sherwin Williams Cleanser Thinner No 5

A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.

£37.80 (£45.36 Inc VAT)