*3M Scotchkote Epoxy Coating 172

Name: *3M Scotchkote Epoxy Coating 172
Brand: 3M
SKU: ID10047
Availability: InStock

SKU

ID10047

***

This product is now discontinued. See PPG SigmaShield 880 or International Interzone 954 as potential alternatives.

In stock

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Details

Product Description

Please note, this product is now discontinued. See PPG SigmaShield 880 or International Interzone 954 as potential alternatives.

3M Scotchkote Epoxy Coating 172 is a surface tolerant anti corrosive coating for steel bridges, gantries and roofs.

Scotchkote Epoxy Coating 172 has been specifically developed as a surface tolerant anti corrosive coating for steel structures such as bridges, gantries and roofs, 172 has been developed to replace 152LV and 152LVAS and is suitable for application by brush or airless spray. Approved by Network Rail for application to station steelwork including roofs metal flooring and steel panels on walls and any other trackside equipment.

Best Uses / Surfaces

As with the Scotchkote 152LV and 152LVAS the new Scotchkote Epoxy Coating 172 offers corrosion protection for up to 25 years. Scotchkote Epoxy Coating 172 is a surface tolerant coating meaning that it can be applied to manually prepared surfaces although a shot blasted surface is preferable and also conforms to Network Rail RT98 and London Underground (LUL) Section 12 approvals.

Application

3M Scotchkote Epoxy Coating 172 has been specifically designed for application using airless spray, however a brush may be used for smaller areas of application which may be tricky to do with a spray gun. Theoretical coverage rate is 2.5m2 per litre, assuming the correct film thickness is achieved, whilst you should ensure you leave a minimum of 16 hours drying time where temperatures are 18 degrees Celsius or above.

Technical

Technical Details

Approvals

LuL APR Reg No. 3246 - Surface tolerant coating for the corrosion protection of structural steel, potentially giving over 25 years of protection. Surface tolerant coating suitable for application to abrasive blast-cleaned surfaces, hand or power tool cleaned surfaces and sound, aged alkyd paints. NR/L3/CIV/039 certified (M34, XM90/N4 and XM92/M24) to give 25 years minimum service life on SA2.5 (shotblasted) or ST3 (manually prepared steel) and 15 years minimum on previously coated sound surfaces. Complies with LU Standard 1-085 'Fire Safety Performance of Materials' and can be used in below ground stations as a single coat system (maximun coating thickness for underground use is 250 microns wet / dry). For above ground use an optional 50 micron coat of Scotchkote Urethane Coating XF 129 can be applied if UV resistance is required.

Technical

Scotchkote Epoxy Coating 172 is a surface tolerant, it combines good application characteristics with excellent corrosion protection and chemical resistance
Is designed for application by airless spray and brush application
Adhesion - Excellent to both blast cleaned and mechanically prepared surfaces
Corrosion Resistance - Excellent even under sea water immersion conditions
Chemical Resistance - Unaffected by short term contact with most industrial chemicals
Temperature Resistance - Suitable for use up to 100° C. dry heat
Theoretical Coverage Rate 2.5 sq m per litre at 400 microns dft.
Touch dry 16 hours
Available in 5 Liters
Colours available: Grey.