Bollom Broflame Ultra Basecoat

SKU
id9973
Non Hazardous
Ideal for all types of interior timber in communal areas providing the highest possible fire rating (Class 0) on the painted surface.
Available in 5 Litres
£106.60 £88.83
In stock
Product Description

Bollom Broflame Ultra Basecoat is a water-based product, offering fire protection to a variety of interior wooden substrates. Combined with Flamegard Ultra you can achieve the highest possible fire rating of Class 0.

Best Uses

Bollom Broflame Ultra Basecoat is best used internally as an undercoat that can be coated over with your choice of Flamgard topcoat, in a variety of colours, to achieve the highest fire rating with a decorative finish that suits your colour scheme.

Application

Bollom Broflame Ultra Basecoat can be applied using brush, roller or airless spray and has a theoretical coverage rate of 5m2 per litre, per coat. After 4 hours the surface will be touch dry ready for a second coat of this product. A further 24 hours should be allowed for the coatings to dry fully ready for your choice of topcoat.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Surface and Environment

Bollom Broflame Ultra Basecoat is highly suited for application to most internal timber surfaces and is ideal for use in communal areas, such as public buildings, schools and hospitals for a coating that inhibits the spread of flame and heat release, allowing for extra time for escaping a building in the event of a fire.

Technical Details

Approvals

  • When used in conjunction with FlameguardTM Ultra this Decorative thin film intumescent base coat delivers a Class 0 rating over solid timber, timber-faced boards and particle boards.
  • Achieves Class 0 fire protection rating to BS476: Parts 6 and 7

Features

  • FlameguardTM paints are designed to inhibit surface spread of flame and heat release, providing vital escape time in the event of a fire
  • Hard wearing protective / decorative finish
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use