This product has been discontinued and is replaced with Hempadur Mastic 45880.
Hempel Hempadur Mastic 8588E Primer is a two pack, high build, aluminium epoxy maintenance primer that has been Highways Agency Approved. Once applied Hempel Hempadur Mastic 8588E Primer forms a hard and tough coating. BBA Cert. no.08/H135-PS8.
Hempel Hempadur Mastic 8588E Primer is a multi purpose coating that can be used for maintenance on objects such as ballast tanks, underwater hulls and new steel. Hempel Hempadur Mastic 8588E Primer can also be used directly on cured zinc silicate.
You can apply Hempel Hempadur Mastic 8588E Primer using either a brush or airless spray. Make sure that the surface is cleaned but Hempel Hempadur Mastic 8588E Primer has surface tolerance meaning that mechanical cleaning of the surface is acceptable.
Surface and Environment
Hempel Hempadur Mastic 8588E Primer is perfect for marine use including on ballast tanks and underwater hulls. Hempel Hempadur Mastic 8588E Primer can be used on cured zinc as well as spray metallised surfaces to minimise popping.
- Highways Agency Approved. Item number 115
- BBA Cert. no.08/H135-PS8
- Available in aluminium.
- Volume solids mixed 77%.
- Theoretical coverage rate minimum at 100microns 7.7m2 per litre. Maximum at 200 microns 3.5m2 per litre.
- Mixing ratio 3:1 base:additive by volume.
- Drying time surface dry at 20 degrees 4 hours.
- Cleaning solvent Hempel's thinner 08450 or tool cleaner 99610.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.