PPG SigmaGuard CSF 585 is a two component, solvent free, amine cured, epoxy coating designed for coating tanks, and has been approved by KIWA Holland for the coating of tanks containing drinking water.
PPG SigmaGuard CSF 585 offers improved visibility in confined spaces due to light colour and works to significantly reduce the risk of explosion and fire hazard. SigmaGuard CSF 585 is available in blue and white gloss finishes for a decorative element on top of the protective properties.
PPG SigmaGuard CSF 585 can be applied using single feed airless spray equipment, and has a theoretical coverage rate of 3.3m2 per litre when applied using this method. SigmaGuard CSF 585 may also be applied using brush for touch ups and line markings. /once applied, the product will be touch dry after 5 hours ready for a second coating after a 24 hour period has elapsed.
Surface and Environment
PPG SigmaGuard CSF 585 is designed specifically for use on tanks, to provide a protective and decorative coating. SigmaGuard CSF 585 can be used on blasted steel to provide a glossy finish. If a holding primer is required to improve adhesion then SigmaGuard 215 can be used.
- WRAS approved coating
- Approved for drinking water use by KIWA Hollard
- Meets NSF/ANSI Standard 61 for potatable water
- Tankcoating for drinking water.
- Can be applied by single feed airless spray equipment
- Reduced explosion risk and fire hazard
- Good visibility in confined spaces due to light colour
|Type:||Solvent Free, Amine Cured|
|Stock Colours:||Blue and White|
|VOC Content:||6.0g per Litre|
|Suitable Substrates:||For potable tanks - carbon steel or concrete|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||3.3 m2 per litre at 300 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||250 - 400 microns|
|Pot Life:||90 minutes at 20°C|
|Touch Dry:||5 hours at 20°C|
|Overcoatable:||Between 24 hours and 20 days at 20°C|
|Fully Cured:||12 days at 20°C|
|Cleaner / Thinner:||Do not thin|
|Shelf Life:||At least 24 months when stored cool and dry|
|Packaging:||Available in 4 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.