International Ceilcote 242 Flakeline
International Ceilcote 242 Flakeline is a flake filled vinyl ester coating which has excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.
Best Uses
Ceilcote 242 Flakeline is intended for use on correctly prepared tanks and steel structures, as well as concrete trenches, pits, dykes and secondary containment. Used for many applications in the power, mining and chemical processing markets, when excellent chemical resistance is required.
Application
The recommended application is by Airless Spray. Application by Roller or Brush is also suitable, however, multiple coats may be required to achieve specified film thickness.
All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application, all steel surfaces should be assessed and treated in accordance with ISO 8504:2000. Oil or grease should be removed in accordance with SSPC-SP1 Solvent Cleaning.
Steel Substrates
For immersion service or service in humid conditions or elevated temperatures, this product should be applied to surfaces which have been prepared by abrasive blast cleaning to Sa3 (ISO 8501-1:2007), SSPC SP5 or NACE #1. For dry environments, abrasive blast cleaning to Sa2½ (ISO 8501-1:2007), SSPC SP10 or NACE #2 will be suitable. A minimum surface profile of 75 microns (3 mils) is required.
Concrete Substrates
Concrete should be well cured prior to application of the flooring, lining or coating system. Refer to the Concrete Surface Preparation Guidelines for more information.
Surfaces must be primed using Ceilcote 380 Primer at 50-125 microns WFT (2-5 mils WFT).
Features and Benefits
- Excellent resistance to a broad range of chemicals, including organic acids and many solvents
- Formulated with lamellar flake fillers for maximum permeation resistance
- Available in a variety of standard grades for application by trowel, brush, roller and airless spray
- Lining and mat reinforced grades available for additional protection
- System versatility allows a flexible tailored approach to any type of application situation
- Can be used in conjunction with a non slip aggregate for secondary containment areas
- Tested exclusively to ensure superior performance
Technical Info
| Components: | Two Component |
| Type: | Flake filled vinyl ester coating |
| Stock Colours: | Grey, Off White |
| Tintable: | No |
| Suitable Substrates: | Steel, Concrete |
| Cleaner / Thinner: | Do not thin. Clean all equipment immediately after use with Ceilcote T410 |
| Shelf Life: | 6 months from date of production unopened |
| Packaging: | Available in 15 Litres |
| VOC Content: | 313 g/lt |
| Application Method: | Airless Spray, Brush, Roller |
| Theoretical Coverage: | 1.90 m²/litre at 450µm d.f.t |
| Finish: | Not intended to be used as a cosmetic finish |
| Touch Dry: | 2 hours at 25°C |
| Volume Solids: | 85% |
| Pot Life: | 50 minutes at 25°C |
| Overcoatable: | Min 4 hours to max 7 days at 25°C |
| Wet Film Thickness (WFT): | 441-735µm |
| Dry Film Thickness (DFT): | 375-625µm |
| Hard Dry: | 4.5 hours at 25°C |
