International Interline 994

Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3470 (Class: 8.3, Pk Grp: II)
For corrosion protection for the internals of steel storage tanks, vessels, spools, pipes and rail cars.
Available in 18 Litres
From £683.15 £569.29
In stock
Only %1 left
Product Description

International Interline 994 is a two component, chemically resistant phenolic epoxy novolac tank lining.

Best Uses

International Interline 994 is suitable for corrosion protection for the internals of steel storage tanks, vessels, spools, pipes and rail cars.

This tank lining is also suitable for lining vessels containing crude oil up to 160ºC (320ºF), vegetable oils (including palm oils) for temperatures up to 90ºC (194ºF) and molten sulphur.


All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000. Where necessary, remove weld spatter and smooth weld seams and sharp edges. Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning.

Abrasive Blast Cleaning
This product must only be applied to surfaces prepared by abrasive blast cleaning to Sa2½ (ISO
8501-1:2007) or SSPC-SP10. For aqueous cargoes in elevated temperature service, the minimum standard of surface preparation should be abrasive blast clean to Sa3, (ISO 8501-1:2007) or SSPC -SP5. A sharp, angular surface profile of 50-75 microns (2-3 mils) is required.

The preferred method of holding the blast standard is by dehumidification. Interline 994 must be applied before oxidation of the steel occurs. If oxidation does occur the entire oxidised area should be reblasted to the standard specified above. Surface defects revealed by the blast cleaning process should be ground, filled or treated in the appropriate manner.

Areas of breakdown, damage, weld seams etc., should be prepared to the specified standard (e.g. Sa2½ (ISO 8501-1:2007) or SSPC-SP10 or power tool cleaned to Pt3 (JSRA SPSS:1984) or SSPC-SP11).

Apply via airless spray. Use a brush or roller for any awkward or small areas.

Technical Details
Components: Two Pack
Type: Epoxy Novolac
Finish: Semi Gloss
Stock Colours: Buff, Grey, Pink
Tintable: No
VOC Content: 257 g/L
Volume Solids: 70%
Suitable Substrates: Steel
Application Method: Airless Spray. Brush or Roller for small areas
Theoretical Coverage: 4 m2 per litre at 175 microns DFT
Wet Film Thickness (WFT): 143 - 286 microns
Dry Film Thickness (DFT): 100 - 200 microns
Induction Time: -
Pot Life: 6 hours at 10°C
Touch Dry: 6 hours at 10°C
Overcoatable: After 60 hours minimum and 10 days at 10°C
Hard Dry: 24 hours at 10°C
Cleaner / Thinner: Do not thin. Clean up with International GTA822 or International GTA415
Shelf Life: 12 months minimum at 25°C (77°F). Subject to re-inspection thereafter.
Packaging: Available in 18 Litres

Related Products