Johnstones Trade Quick Dry Metal Primer

SKU
id17217
UN3082 (Class: 9, Pk Grp: III)
A water-borne metal primer with excellent anti-corrosive and adhesion properties making it ideal for use on suitably prepared ferrous metals.
Available in 2.5 Litres in White
£58.10 £48.42
In stock
Product Description

Johnstones Trade Quick Dry Metal Primer is a water-borne metal primer with excellent anti-corrosive and adhesion properties making it ideal for use on suitably prepared ferrous metals.

Best Uses

Johnstones Trade Quick Dry Metal Primer is ideal for using as part of a system with Johnstone’s Water Based Steel & Cladding Topcoat. This product primes suitably prepared ferrous metals, such as, steel, iron and prepared galvanised steel. This product is quick drying and with low odour.

Application

All surfaces to be painted should be sound, clean, dry and free from grease, polish and loose or flaking material. Existing rust or millscale should be removed from iron and steel. Johnstone’s Cleaner & Degreaser should be used to suitably clean the surface. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.

Stir well before use. Easy to apply by brush, roller or spray. Do not thin.

Technical Details
Components: One Part
Type: Water Borne
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: 100.0g per Litre
Volume Solids: 32%
Suitable Substrates: For use on suitably prepared ferrous metals
Application Method: Brush, Roller, or Spray
Theoretical Coverage: 10 m2 per litre
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 34 microns
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: After 4 hours at 20°C
Fully Cured:  
Cleaner / Thinner: Water
Shelf Life: 5 years
Packaging: Available in 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use