*Jotun Hardtop AS

SKU id22167 ***
This product is now discontinued.

Product Description

This product is now discontinued. It has been replaced with the Jotun Hardtop AX.

Jotun Hardtop AS is a two component chemically curing aliphatic acrylic polyurethane coating. Benefits from a high gloss finish with excellent gloss retention, and good chemical resistance. To be used as topcoat in atmospheric environments. NORSOK approved.

Best Uses

Jotun Hardtop AS is formulated as a high gloss, chemical resistant topcoat finish. Suitable for use in marine environments such as topside, deck and superstructure. Also recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.

Jotun Hardtop AS is heat resistant in dry atmospheric environments continuously up to 120°C.

Also available in Jotun Hardtop AS Alu variant.


To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Ensure the primed surface is compatible within the Jotun system. Apply via airless spray or conventional spray as per technical data sheet. Use a brush for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.

Recommended Products To Use

Jotun Thinner No. 10

Jotun Thinner No. 10

A solvent for the following Jotun paints Hardtop AS, Hardtop XP, Hardtop Flexi Hardtop HB Hardtop XA.

£25.13 (£30.16 Inc VAT)
Jotun Thinner No. 25

Jotun Thinner No. 25

A general purpose solvent based thinner designed to improve the flow of Jotun inorganic zinc ethyl silicate products.

£33.39 (£40.07 Inc VAT)