KEIM Glasfaser-Gittermatte (Glassfibre mesh) is embedded centred or in the upper third with an overlap of 10 cm depending upon employed system. Remove spreader ridges after drying. Within the reinforcement layer a trowel cut is performed at joints between adjacent components.
Keim Glassfibre Reinforcement Mesh for use to reinforce cracks on solid mineral surfaces and for incorporation into the Keim Universal Render system.
If the whole surface is cracked, apply mesh embedded in a thin layer of Keim Universal Render, overlapping where pieces meet. For isolated cracks, mesh may be solely applied over the crack and surrounding 20cm. Cracks should be chased out and those above 4mm should be filled with Keim Universal Render prior to the base coat application. Ambient and substrate temperature should be between 5° C and 30° C.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.