Mapei Mapenet 150, 1m x 50m

SKU
id13596
Non Hazardous
An alkali-resistant fibre glass mesh used to reinforce waterproof protection layers, antifracture membranes and cementitious smoothing and levelling layers.
Available In Rolls 1m wide by 50m
£169.90 £141.58
In stock
Product Description

Mapei Mapenet 150 is an alkali-resistant fibre glass mesh used to reinforce waterproof protection layers, antifracture membranes and cementitious smoothing and levelling layers.

Best Uses

Mapei Mapenet 150 is suitable as reinforced strengthening for Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic for waterproofing terraces, balconies, swimming pools, baths, shower cubicles, etc. with ceramic tile or stone finishes. Suitable for use as a protective, flexible smoothing layer for Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic if applied onto internal and external cementitious substrates with micro cracks. Also suitable for Mageum WPS and Aquaflex as a waterproofing layer

Application

Mapei Mapenet 150 is a glass fibre mesh that must be completely embedded in the waterproofing layer. With a smooth trowel, apply an even layer approximately 1-1.5 mm thick of the waterproofing product. While the product is still fresh, lay the Mapenet 150 mesh on the surface and press it gently with the trowel so that it is embedded in the layer. Wait for the layer to dry (usually 12 to 24 hours dependent on the type of product used. The thickness applied and the surrounding temperature and level of humidity) and, if required, apply a second layer of the product. Overlap each piece of glass fibre by at least 5/10 cm.

Technical Details
  • Mesh Size: 4x5mm
  • Weight: 150g/m2 plus or minus 5%
  • Available in Blue
  • Sold in rolls 1 metre wide by 50 metres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use