£7.75 delivery on orders excluding certain products & postcodes *
Keim Silan Primer penetrates into the pores and any hairline cracks of mineral building materials. After evaporation of the solvent, the active component is deposited on the walls of the pore and, once subsequently coated with a Keim Mineral paint system develops water repellent characteristics.
Keim Silan Primer does not seal the pores of the building material, ensuring that the water vapour permeability of the substrate remains virtually unchanged.
It is particularly good practice to pre-treat horizontal and inclined surfaces with KEIM Silan Primer prior to redecoration to help shed water and protect the surfaces. KEIM Silan Primer can only be applied onto bare surfaces.
All loose, flaking and unstable material must be identified and then thoroughly removed. All surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application of Keim Silan Primer
may proceed.
Keim Silan Primer should be applied to bare areas as a flood coat, by brush or low pressure spray, undiluted and within a period of 2 to 6 hours. These times are critical. The first coat of Keim Mineral Paints must then be applied.
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces , nor if it is raining or if there is an immediate likelihood of rain.
Keim Silan Primer should be applied to bare areas as a flood coat, by brush or low pressure spray, undiluted and within a period of 2 to 6 hours. These times are critical. The first coat of Keim Mineral Paints must then be applied.
Components: | Single Pack |
Type: | Water Repellent Silane-based Primer |
Finish: | - |
Stock Colours: | - |
Tintable: | No |
Suitable Substrates: | For use with Keim Mineral Paint on mineral building materials |
Application Method: | Brush or low pressure spray |
Theoretical Coverage: | Approx. 0.2lt/m2 per flood coat application |
Application Conditions: | Ambient and substrate temperature above 5°C and below 30°C |
Cleaner / Thinner: | Clean tools with Water |
Shelf Life: | 12 months if kept cool but frost free in tightly closed containers |
Packaging: | Available in 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.