Centrecoat R21 Hard Surface & Worktop Cleaner is a water based quartz and solid surface cleaner containing a blend of surface active agents
Centrecoat R21 Hard Surface & Worktop Cleaner is suitable for quartz worktops, polished granite, polished marble, uPVC, Stainless Steel, glass, painted surfaces, wood surfaces, and brass, copper, zinc and aluminium. Ideal for worktops and associated surfaces that are exposed to high and regular use. Enables easy cleaning of soiling oils and grease.Suitable for vertical and horizontal surfaces such as worktops and floors. Non caustic.
Spray an even, light application to a clean and dry surface from a distance of 10-15cm. Leave for 30-40 seconds. Remove excess by wiping with a dry, soft cloth. Within minutes, buff the whole treated surface using a fresh dry, clean soft cloth.
|VOC Content:||0.0g per Litre|
|Suitable Substrates:||For Quartz Worktops, Polished Granite, Polished Marble, uPVC, Stainless Steel, Glass, Painted Surfaces, Wood Surfaces, Brass, Copper, Zinc & Aluminium|
|Application Method:||Via Triggered Bottle|
|Theoretical Coverage:||5 - 10 m2 per 500ml|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||Water|
|Shelf Life:||Keep in a dry place (between 5°C and 30°C). 24 months following the production date when kept in the original unopened container|
|Packaging:||Available in 250 ml|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.