Jotun Muki EPS

SKU
id17150
Part A: UN1263 (Class: 3, Pk Grp: II), Part B: UN1263 (Class: 3, Pk Grp: III)
A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning.
Available in 18.5 Litres
From £204.47 £170.39
In stock
Only %1 left
Product Description

Jotun Muki EPS is a two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning.

Best Uses

Jotun Muki EPS is fast drying making it suitable for stacking shortly after application. Can be used as temporary primer in a new construction phase, as holding primer or as primer in a complete coating system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates and recommended to be applied in an automated shop priming line in lower film thicknesses or applied by airless spray when used as holding primer. Compatible with advanced welding technologies including MIG, MAG and G-FCAW when applied in low film thickness.

Suitable as shop primer or holding primer on vessels. Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed.
Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Application

Prepare carbon steel to Sa 2 1/2. Apply using an airless spray, Conventional sprays and brushes can be used for touch up purposes. Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product including epoxies, epoxy mastics, alkyds and acrylics.

Technical Details

Approvals

  • Welding approved according to DVS-guideline 0501
  • Type approved as shop primer by DNV
  • Type approved shop primer by RMSR
  • Health approved for use as shop primer by Newcastle occupational Health
  • Norsok M-501 System 1 (Pre Qualified)
  • Norsok M-501 System 7A

Technical Info

Components: Two Part
Type: Chemically curing epoxy coating
Finish: Matt
Stock Colours: Red and Grey
Tintable: No
VOC Content: 609.0g per Litre
Volume Solids: 25%
Suitable Substrates: For properly prepared carbon steel substrates
Application Method: Airless Spray. Conventional Spray or Brush for Touch Up
Theoretical Coverage: 5 - 16.7 m2 per litre
Wet Film Thickness (WFT): 60 - 200 microns
Dry Film Thickness (DFT): 15 - 50 microns
Induction Time: -
Pot Life: 24 hours at 23°C
Touch Dry: 1 minute at 23°C
Overcoatable: 7 hours at 23°C
Fully Cured: 7 days at 23°C
Cleaner / Thinner: For Slow Evaporation Jotun Thinner No. 17 and For Fast Evaporation Jotun Thinner No. 3
Shelf Life: 24 months for Part A, 48 months for Part B
Packaging: Available in 18.5 Litres

Related Products