Sherwin Williams Dura-Plate 301W is a 0°C low temperature curing, surface and humidity tolerant two pack modified epoxy for use as an anti corrosive coating for long life steel protection.
Dura-Plate 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over wet steel surfaces. 301W shows good chemical and abrasion resistance and good edge-retentive properties. It can be applied over steel prepared by hydro-blasting, grit blasting or mechanical tooling.
This product has excellent edge retention, no dew point or relative humidity restrictions, excellent anti-corrosive properties, can be applied over wet substrates, can be applied over medium flash rust and has excellent substrate and intercoat adhesion. DURA-PLATE 301W is an anti-corrosive coating for long service life steel protection.
It can be used for both immersion and above the waterline service in marine, offshore, construction and industrial applications. It is suitable for new building, conversion, repair or maintenance applications. It provides superior performance protecting areas such as ballast tanks, void tanks, crude oil tanks, slop tanks, mud pits, wet spaces, bilges, decks, external hull and steel bridges.
Surface must be clean and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion. DURA-PLATE 301W is tolerant to hydroblasted, wet or dry abrasive blasted or mechanically prepared surfaces. Applicable via airless spray or brush for stripe coats or touch up on small areas.
- Dura-Plate 301W is approved for Network Rail maintenance specification
- Certificate No’s XM92-M34-197, XM92-M34-200, XM92-M34-201
- Finish: Semi-gloss
- Dry Film Thickness: 100 - 300 microns
- Pot Life: 50 minutes at 10°C
- Drying Times: 15 hours to touch at 10°C, 24 hours - 6 months at °C to recoat
- Theoretical Coverage: 9.7me per litre for 100 microns, 3.3m2 per litre for 300 microns
- Available in a limited range of colours
- Available in 4 and 16 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.