Zinga Zingalufer Formerly Alufer N

UN1263 (Class: 3, Pk Grp: III)
A one pack, PU MIO sealer suitable for use over Zinga and Aquazinga, providing a protective seal against salt and chemical exposure.
Available in 5 Litres
£161.33 £134.44
In stock
Product Description

Zinga Zingalufer is a single pack polyurethane MIO sealer suitable for use over Zinga and Aquazinga, providing a protective seal against salt and chemical exposure.

Best Uses

Zinga Zingalufer can be used an intermediate layer or topcoat for an existing layer of Zinga in immersed or chemical environments. Examples of suitable projects include ship hulls and sewage works. Micaceous iron oxides (MIO) create the special lamellar structure which create a very tight paint film for optimal barrier protection and corrosion resistance. Zinga Zingalufer is used as a sealer on ZINGA, as an intermediate coat in a three layer ZINGA system.


When the waiting time between the successive coats is abnormally prolonged or in extremely polluted areas, the Zinganised surface can become contaminated. All contaminations that hamper the adhesion of the paint should be removed by appropriate means. Surfaces contaminated with oil and grease should be washed down with solvent, alkaline solutions or emulsifier. Salt deposits or other water-soluble contaminations should be removed with water and brush, water under high pressure or steam. Possible white rust on ZINGA should be removed with water and rigid nylon brush.

Apply on to of original Zinga using brush, roller, conventional spray gun or airless spraying. Clean tools using Zingasolv. Dilute with 10-15% Zingasolv or Thinner 41.

Technical Details
Components: One Part
Type: Moisture Curing Polyurethane MIO
Finish: Matt
Stock Colours: Grey
Tintable: No
VOC Content: 300.0g per Litre
Volume Solids: 79%
Suitable Substrates: Used as a sealer on ZINGA, as intermediate coat in a three layer ZINGA system
Application Method: Brush, Roller, Conventional Spray or Airless Spray
Theoretical Coverage: 8.3 m2 per litre at 80 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT): 80 - 150 microns
Induction Time: -
Pot Life: -
Touch Dry: 4 hours at 20°C at 80 microns
Overcoatable: Between 6 hours to 1 month at 20°C at 80 microns
Fully Cured: -
Cleaner / Thinner: Zinga Zingasolv
Shelf Life: 2 years unopened
Packaging: Available in 5 Litres
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products