£9.95 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
Advanced Search
My Cart

NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces

Shop By
Filter by
  1. Manufacturer Jotun Remove This Item
  2. Substrate Steel, Carbon Remove This Item
  3. Product Chemistry Solvent Based Remove This Item
Clear All
Filter by

4 Items

Set Descending Direction
  1. Jotun Tankguard HB Classic Formerly Tankguard HB
    Jotun Tankguard HB Classic Formerly Tankguard HB

    A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

    From £344.88 £287.40
  2. Jotun Jotamastic 87 Aluminium WG
    Jotun Jotamastic 87 Aluminium WG

    Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

    From £83.80 £69.83
  3. Jotun Jotamastic 80 Aluminium
    Jotun Jotamastic 80 Aluminium

    A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

    From £57.76 £48.13
  4. Jotun Penguard Pro
    Jotun Penguard Pro

    A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

    From £363.65 £303.04
per page
System 1 (pre-qualified) Carbon steel with maximum operating temperature < 120°C (248°F)
Structural steel
Exteriors of equipment, vessels, piping and valves (not insulated)
System 2 Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified) Internal surface of carbon steel tanks
System 4 (pre-qualified) Walkways, escape routes and lay down areas
System 5A (pre-qualified) Epoxy-based fire protection
System 5B (pre-qualified) Cement-based fire protection
System 6A Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B Hot-dipped, galvanized steel when painting is required
System 6C Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified) Carbon and stainless steel in the splash zone
System 7B (pre-qualified) Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified) Submerged carbon and stainless steel > 50°C (122°F)
System 8a

Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b

Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9 Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)