NORSOK Approved Paints

Hempel Hempadur 35560 - WRAS Approved
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

From £387.55 £322.96
Hempel Hempaxane Light 55030
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

From £265.33 £221.11
Hempel Galvosil 15700
A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

£238.50 £198.75
Hempel Hempadur AvantGuard 750
A versatile primer for long-term protection of steel in severely corrosive environments.

£280.97 £234.14
*Hempel Polyester GF 35920
This product is now discontinued. See Hempel Hempaline Defend 630 as a potential alternative.

In stock
Hempel Versiline CUI 56990
For long-term protection of hot pipework, equipment and other hot surfaces.

From £324.96 £270.80
Hempel Hempadur Quattro 17634
A universal epoxy and self-primed high performance coating system.

From £191.24 £159.37

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)