NORSOK Approved Paints

PPG SigmaDur 550 H
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.

From £69.60 £58.00
PPG SigmaDur 550
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).

From £80.16 £66.80
*PPG SigmaCover 240 Formerly Amercoat 240
This product is now discontinued. See Hempel Hempadur 15570 as a potential alternative.

In stock
PPG SigmaDur 520
A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.

From £91.20 £76.00
PPG SigmaFast 278
A 2 component high solids rapid drying zinc phosphate epoxy Primer and build coat that has been formulated to cure at low temperatures down to -5°...

From £73.06 £60.88
PPG SigmaShield 880
A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

From £75.83 £63.19

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)