NORSOK Approved Paints

PPG SigmaCover 410 MIO
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

From £324.00 £270.00
PPG SigmaPrime 200
A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.

From £270.48 £225.40
PPG SigmaPrime 700
A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.

From £320.64 £267.20
PPG SigmaCover 522
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.

From £333.41 £277.84
PPG NovaGuard 260 Formerly SigmaGuard 260
A two component, high build, amine adduct cured, phenolic epoxy holding primer.

From £266.02 £221.68
PPG SigmaZinc 68 GP
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

From £267.84 £223.20

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)