NORSOK Approved Paints

Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A two component multipurpose polyamide anti-corrosive epoxy paint system from PPG.

A two component multi purpose polyamide cured anti-corrosive epoxy paint system from PPG.

A hard wearing, anti slip extra heavy duty deck coating system. Reaches NORSOK M-501 and BS.476 Part 7: Surface spread of flames

A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.

A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A low VOC, high solids, high build, two component epoxy coating.

A versatile primer for long-term protection of steel in severely corrosive environments.

For long-term protection of hot pipework, equipment and other hot surfaces.

A universal pure epoxy and self-primed high performance coating system for atmospheric or in water service.

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A two component, high build, amine adduct cured, phenolic epoxy holding primer.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A self-priming, two-component, high-build, pure epoxy paint.

A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.

A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A 2 pack structural steel and piping coating that will continue to cure while immersed.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.