NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

International Intertherm 50
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

From £192.89 £160.74
International Interzone 954
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

From £123.78 £103.15
International Interzinc 52
A two component, anti-corrosive metallic zinc rich epoxy primer.

From £340.96 £284.13
International Interfine 691
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

From £96.59 £80.49
International Interfine 878
A tough, hard wearing finish coat for application over properly primed surfaces.

From £365.58 £304.65
International Intergard 410
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

From £99.60 £83.00
International Interzone 1000
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

From £557.99 £464.99
International Intergard 269
A quick drying two component epoxy primer for immersed or exposed conditions within a system.

From £79.68 £66.40
International Intercure 200HS
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

From £377.92 £314.93
International Interline 925
For application to steel tank internals.

From £751.30 £626.08
International Interzinc 52E
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

From £347.63 £289.69
International Interzone 3507
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

From £349.30 £291.08

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)