NORSOK Approved Paints

Hempel Hempadur 35560 - WRAS Approved
Approved potable water, solvent-free, high-build, polyamine adduct cured epoxy paint.

From £387.55 £322.96
Jotun Tankguard DW
A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

From £384.76 £320.63
Jotun Penguard Pro
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

From £363.65 £303.04
International Interfine 878
A tough, hard wearing finish coat for application over properly primed surfaces.

From £365.58 £304.65
International Intershield 300
A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

From £398.16 £331.80
International Intercure 200HS
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

From £377.92 £314.93
Jotun Resist 86
A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

£368.05 £306.71
PPG Dimetcote 9 Formerly SigmaZinc 9
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

From £380.76 £317.30

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)