Osmo Wood Oil Stain Hardener 6631, 60ml

SKU
id13890
UN1263 (Class: 3, Pk Grp: III)
Acts as an additive for Osmo Wood Oil Stain for accelerated drying.
Available in 60ml
£8.32 £6.93
In stock
Product Description

Osmo Wood Oil Stain Hardener acts as an additive for Osmo Oil Stain for accelerated drying.

Best Uses

When combining with Osmo Wood Oil Stain the drying time is shortened from 12 hrs to just 4 hrs by simply pouring the contents of the hardener (60ml) into the 1L Oil Stain can and stirring thoroughly prior to application.

  • Shortened drying time for Osmo Wood Oil Stain
  • For high traffic areas
  • Ideal for commercial and public buildings

Application

Preparations before use of Osmo Wood Oil Stain are not influenced by the application of the hardener additive. These are valid without any restrictions. For this
purpose, please observe the product information for Osmo Wood Oil Stain. Add Osmo Wood Oil Stain Hardener for Osmo Wood Oil Stain completely to the
can of Osmo Wood Oil Stain (1.0 litre) and stir so that both components are mixed well. Further processing to be carried out corresponds to that of Oil Stain.

Note: Pot time is reduced down to 60 minutes by adding the Hardener. Please do not mix together more material than you can process with certainty within 45
minutes. If you do not use the entire can of Osmo Wood Oil Stain, add 6% Hardener – mix in a separate container!

Technical Details

Guidance

  • Pot time is reduced down to 60 minutes by adding the Hardener. Please do not mix together more material than you can process with certainty within 45 minutes. If you do not use the entire can of wood finish, add 6 % Hardener – mix in a separate container
  • A top coat of Osmo Polyx®-Oil 2K is always required when using Osmo Wood Oil Stain

Technical Info

  • Odour: Faint / Mild
Components: Single Pack
Type: Aliphatic polyisocyanate, methoxy propyl acetate.
Finish:
Stock Colours: 6631 Clear
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: For interior wood. Ideal for commercial and public buildings the hardener acts as an additive for Osmo Oil Stain
Application Method: Add hardener completely to the the can of oil stain and stir well
Theoretical Coverage: The product coverage of Oil Stain is not changed by adding hardener.
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: After hours at 20°C
Fully Cured: Approx. 3-4 hours at 23 °C
Cleaner / Thinner: Clean tools with Osmo Brush Cleaner
Shelf Life: Up to 1 year and longer if can is kept dry and closed tightly
Packaging: Available in 60ml

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use