£9.95 delivery on orders excluding certain products & postcodes *
Osmo Oil Stain is resistant to dirt, water and abrasion and smoothens the surface. In comparison to conventional finishes, the use of plant ingredients creates a more evenly coloured and more harmonious appearance. The necessary clear top coat is to be carried out with a clear Osmo Polyx®-Oil Original.
Osmo Oil Stain is ideal as a coloured primer for all wooden floors, such as solid wood and plank flooring, blockstrip, OSB and cork flooring, as well as stairs and furniture.
Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Oil Stain is ready to use, please do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P120-150, for furniture P220-240.
Before oiling the surface, remove sanding dust with a broom or vacuum. The finished surface is, among other things, influenced by the wood‘s natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.
When Transparent Colour Is Required:
Apply very thinly and evenly to the clean and dry wood along the wood grain with Osmo Double Blade Scraper, Osmo Microfibre Roller or Osmo Floor Brush 150 mm, and massage into the wood with a white pad. Allow to dry for approx. 12 hours with good ventilation.
When An Intensive Colour Is Required:
If a stronger colour intensity is desired, apply very thinly and evenly to the clean and dry wood along the wood grain with Osmo Microfibre Roller or Osmo Floor Brush150 mm, and spread well.
Tip:
With an unused Microfibre Roller, any brushstrokes can be removed within 30 minutes after application. Allow for good ventilation while drying.
For smaller areas, e.g. furniture:
Osmo Oil Stain can be applied with a lint-free cloth. After thoroughly drying, a top coat should be carried out with a clear Osmo Polyx®-Oil Original.
Components: | Single Pack |
Type: | Based on natural plant oils |
Finish: | - |
Stock Colours: | 3501 White, 3512 Silver Grey, 3514 Graphite, 3516 Jatoba, 3518 Lt Grey, 3519 Natural, 3541 Havanna, 3543 Cognac, 3564 Tobacco, 3590 Black |
Tintable: | No. |
VOC Content: | max. 500 g/l |
Volume Solids: | - |
Suitable Substrates: | All wooden floors, such as solid wood, plank, strip OSB and cork flooring, as well as stairs and furniture surfaces. Interior use. |
Application Method: | Osmo Floor Brush or Microfibre Roller |
Theoretical Coverage: | 1 litre covers approx. 24-48 m² with one coat. Coverage depends on porosity of wood |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Odour: | Faint / Mild |
Application Temperature: | Over 5°C |
Drying Time: | Approx 12 hours at 23°C |
Overcoatable: | - |
Fully Cured: | - |
Cleaner / Thinner: | Clean tools with Osmo Brush Cleaner |
Shelf Life: | Up to 5 years and longer if can is kept dry and closed tightly. |
Packaging: | Available in 2.5 Litres |