ProtectLine Waterbased Acrylic Sealer is a single pack, water-based protective varnish sealant which is fast drying and easily applied. ProtectLine is designed to be used as a sealer or varnish for Spectrum lining systems.
ProtectLine Waterbased Acrylic Sealer is fully sprayable using airless spray machines; it can also be applied by hand. Compatible with many line marking products.
- Water- dilutable
- Very low odour
- Extends the life span of lines
- Eliminates chalking and yellowing
- Maximises colour retention
The application surface should be sound and clean, free from grease, oil, rust, scale, dirt, or any other soiling that might affect adhesion or performance. In any case, but especially in the case of overcoating existing line markings, it is further recommended that test areas be coated to ensure good adhesion and/or compatibility with the substrate/previously applied coatings.
Shake thoroughly before use. We recommend application via roller or brush. Airless spray equipment can also be used with a tip size of 213.
|Suitable Substrates:||For application over Soppec line marking aerosols|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||15 - 20m2 per litre. 1 or 2 Coats for high traffic areas.|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||5 minutes at 15°C|
|Overcoatable:||1 - 2 hours at 15°C|
|Fully Cured:||1 hour at 15°C|
|Cleaner / Thinner:|
|Shelf Life:||6 months when stored under cover, in original unopened containers|
|Packaging:||Available in 1 Litre|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.