Rustoleum Hard Hat 2102 Adhesion Primer Aerosol *CLEARANCE*

UN1950 (Class: 2)
A tacky adhesion coat to smooth surfaces such as Galvanised, stainless steel, aluminium, copper, hard pvc, glass and ceramics.
Available in 500ml
£9.90 £8.25
In stock
Product Description

Please note, this product is now discontinued. However, we have a small quantity of stock available. Grab a bargain today!

Rustoleum 2102 Adhesion Primer Aerosol produces a tacky adhesion coat to smooth surfaces such as galvanised, stainless steel, aluminium, copper, hard pvc, glass and ceramics.

Rustoleum 2102 Adhesion Primer Aerosol is part of the Rustoleum Aerosol Paint range that offers excellent adhesion and durability qualities to a range of smooth surfaces and substrates. Rustoleum 2102 Adhesion Primer Aerosol is available in 500ml cans for light maintenance jobs.

Best Uses

Rustoleum 2102 Adhesion Primer Aerosol is best used for small maintenance jobs and touch ups for quick and easy application and is ideally used in light industrial exposures with normal humidity and interior applications


Remove dirt, grease, oil and all other surface contaminants by appropriate means. Remove previous coatings completely e.g. with Rust-Oleum Paint Stripper 2925. The surface must be clean and dry during application.

For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C. Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can at least 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply a single, thin layer and avoid application of thick layers. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

Surface and Environment.

Rustoleum 2102 Adhesion Primer Aerosol is designed for use externally and internally in light industrial exposures for use on galvanised and stainless steel, aluminium, copper, hard PVC, glass and ceramics.

Technical Details
Components: Single Pack
Type: Aerosol
Finish: n/a
Stock Colours: n/a
Tintable: No
VOC Content: 730 g/L
Volume Solids: -
Suitable Substrates: For galvanized steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rustoleum
Hard Hat 2100 Topcoats
Application Method: Aerosol
Theoretical Coverage: 5.5 m2 per Aerosol Can
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: Remains tacky
Overcoatable: After 30 minutes but within 24 hours at 20°C
Fully Cured: -
Cleaner / Thinner: -
Shelf Life: 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Packaging: Available in 500ml

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use