Rustoleum Combiprimer 3302
Rustoleum CombiPrimer Tack Coat 3302 is an adhesion coat based on a solvent containing acrylic. Suitable for a huge range of substrates that are difficult for paint to adhere to.
Best Uses
Rustoleum CombiPrimer Tack Coat 3302 is ideal for use on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces. Ideal topcoats include Rustoleum CombiColor Original or Combicolor MS. CombiPrimer Tack Coat 3302 is primarily intended for brush application.
Application
Remove grease, oil and all other surface contaminations by alkaline or high pressure cleaning in combination with appropriate detergents. Remove previous coatings completely. Remove salts, 'white rust', etc., by washing with Rustoleum Surfa-Etch 108 Etching Solution. The surface must be clean and dry during application.
To ensure homogeneity, coating materials should be thoroughly stirred prior to use. Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
| Components: | Single Pack |
| Type: | Solvent Based Acrylic |
| Finish: | |
| Stock Colours: | |
| Tintable: | No |
| VOC Content: | 745 g/L |
| Volume Solids: | 20% |
| Suitable Substrates: | Galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces. |
| Application Method: | Use natural bristles, longhair brushes. |
| Theoretical Coverage: | 50m2 per litre |
| Wet Film Thickness (WFT): | 20 microns |
| Dry Film Thickness (DFT): | 2 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | Remains Tacky at 20°C |
| Overcoatable: | After 30 minutes but before 24 hours at 20°C |
| Fully Cured: | |
| Cleaner / Thinner: | Rustoleum Thinner 160 |
| Shelf Life: | Minimum of 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. |
| Packaging: | Available in 250ml |
