Rustoleum Hard Hat 1017 Galva Zinc-Alu

Suitable for a many environments including extreme heat up to 300°C. Designed for steel surfaces.

Available in 1 Kg

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£16.11

Inc VAT £19.33

PRODUCT DETAILS

Rustoleum Galva Zinc-Alu 1017 is suitable for a variety of environments including those of extreme heat up to 300°C. Designed for application to new or bare steel, blasted steel or galvanized steel surfaces.

Rustoleum Galva Zinc-Alu is a zinc rich coating based on an epoxy ester resin that works to dry quickly. Galva Zinc-Alu contains pure Zinc and Aluminium pigments and provides cathodic protection.

Best Uses

Rustoleum Galva Zinc-Alu 1017 is ideal for use in light industrial exposures, corrosive environments and high humidity areas with just one single application. When dry you will achieve a flat aluminium finish.

Application

Rustoleum Galva Zinc-Alu should ideally be applied using a brush for application to small areas or touch ups with a theoretical coverage rate of 11.5m2 per Kg when used for larger surface areas. Rustoleum Galva Zinc-Alu is touch dry after 1-2 hours under normal conditions of approximately 20°C.

Surface and Environment

Rustoleum Galva Zinc-Alu can be used on a variety of environments including those of extreme heat for a dry heat resistance of up to 300°C. Specifically designed for application to new or bare steel, blasted steel or galvanized steel surfaces.

TECHNICAL

Notes

Bright Galvanizing 1017 can be applied on new, bare steel, blasted steel or galvanized steel surfaces
Primarily intended for brush application on small areas or for touch-up
Can be recoated with non-saponifiable coatings
Used as a single coat in light industrial exposures, corrosive environments and high humidity areas
Heat resistance: 450°C (dry heat)

Technical Info

Components:	One Part
Type:	Zinc Rich Primer / Topcoat Based On Epoxy Ester Resin
Finish:	Matt, Metallic
Stock Colours:	Aluminium
Tintable:	No
VOC Content:	647.0g per Litre
Volume Solids:	-
Suitable Substrates:	For Galvanised Steel
Application Method:	Brush
Theoretical Coverage:	11.5m2 per Kg
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time:	-
Pot Life:	-
Touch Dry:
Overcoatable:
Fully Cured:
Cleaner / Thinner:
Shelf Life:	3 years
Packaging:	Available in 1 Kg