Rust-Oleum 1085 Cold Galvanising
Rustoleum Cold Galvanizer 1085 is a fast drying, zinc rich primer based on an epoxy ester resin. Contains pure zinc as pigment and provides cathodic protection to metal to protect against rust.
Best Uses
Rustoleum Mathys Cold Galvanizer 1085 is ideally suited for use in industrial exposures where there is a need for protecting steel. Cold Galvanizer 1085 is part of Promain's extensive range of Rustoleum Metal Protection products that work well on all kinds of different metal substrates, including, storage tanks, guard rails, ducts and production wells.
- Offers long-lasting cathodic protection of metal
- 90% zinc content
- Touch dry in just 15 minutes
- Heat resistance up to 300°C
- Ideal for touching-up galvanised steel, welding seems etc.
Application
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 μm. The surface must be clean and dry during application.
To ensure homogeneity, coating materials should be thoroughly stirred prior to use. To avoid settlement of the zinc pigments on the bottom of the can, stir regularly during application.
Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
APPLICATION & THINNING: BRUSH
Up to 5% volume Rust-Oleum Thinner 160. Use natural bristles, long hair brushes.
| Components: | Single Pack |
| Type: | Zinc Rich Primer |
| Finish: | Matt |
| Stock Colours: | Grey |
| Tintable: | No |
| VOC Content: | VOC Level: 440 g/l, VOC Limit: 500 g/l |
| Volume Solids: | 47.6% |
| Suitable Substrates: | New, bare steel, blasted steel or galvanized steel surfaces |
| Application Method: | Brush |
| Theoretical Coverage: | 13 m²/l = 4,7 m²/kg |
| Wet Film Thickness (WFT): | 75 μm |
| Dry Film Thickness (DFT): | 35 μm |
| Induction Time: | - |
| Touch Dry: | 15 minutes at 20°C |
| Dry To Handle: | 2 hours at 20°C |
| Overcoatable: | After 4 hours at 20°C |
| Fully Cured: | 3 days at 20°C |
| Cleaner / Thinner: | Up to 5 vol. %; Rust-Oleum Thinner 160. |
| Shelf Life: | Minimum of 5 years from date of production in unopened cans, if stored in dry, well ventilated areas |
| Packaging: | Available in 5 Litres |
