Rust-Oleum Hard Hat Advanced 2700 Primer & Topcoat in 1
Rust-Oleum Hard Hat Advanced 2700 Primer and Topcoat in 1 aerosols are the ultimate industrial lacquer for a wide range of substrates including bare steel or galvanised steel.
Best Uses
Based on a fast drying short oil soya alkyd resin, it's lead, chromate and zinc free, anticipating the most stringent regulations to come. It's proprietary technology confers strong anticorrosive properties, flexibility and excellent chemical resistance to offer longlasting resistance in harsh industrial environments.
- Ultimate quality Primer & Topcoat in 2 in 1
- Strong corrosion protection
- High colour retention
- Flexible - doesn't peel off
- High chemical resistance
Rust-Oleum Hard Hat Advanced 2700 Primer & Topcoat in 1 can be applied over properly prepared painted substrates, bare steel, brushed light rust, galvanised, aluminium and many other substrates. RUST-OLEUM Hard Hat® Advanced 2700 Primer & Topcoats in
1 is intended for small maintenance jobs or for touch-up. Suitable for use in light industrial exposures, normal humidity for interior & exterior applications.
Application
Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Sand intact coatings to provide a proper key for adhesion. The surface must be clean and dry during application.
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing balls is heard. Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray
button is pressed to avoid runs and sags. Apply several thin layers at a few minutes interval to achieve adequate coating thickness. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
Bright topcoats may need a light coloured primer/intermediate coat.
| Components: | Single Pack |
| Type: | Aerosol |
| Finish: | Gloss, Matt, Satin |
| Stock Colours: | See colourcard |
| Tintable: | No |
| VOC Content: | 640 - 650 g/l |
| Volume Solids: | - |
| Suitable Substrates: | Properly prepared painted substrates, bare steel, brushed light rust, galvanised, aluminium and many other substrates |
| Application Method: | Aerosol |
| Theoretical Coverage: | 2.5 -3 m² per spray can at 25 μm dry |
| Wet Film Thickness (WFT): | 100 μm |
| Dry Film Thickness (DFT): | 25 μm |
| Induction Time: | - |
| Touch Dry: | 20 minutes at 20°C |
| Dry to Handle: | 45 minutes at 20°C |
| Dry to Recoat: | Within 1 hour or after 48 hours at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | - |
| Shelf Life: | 5 years from date of production in unopened cans |
| Packaging: | Available in 6 x 500ml Aerosols |
