Rust-Oleum PVDF Metal Cladding Primer
Rustoleum Metal Cladding PVDF Primer is a solvent based super adhesion primer for use on PVDF and PDVF2 metal profile cladding.
Best Uses
Rustoleum PVDF Primer has been specially developed as an adhesion primer for use on PVDF and PDVF2 metal profile cladding. PVDF Primer is also ideal for application to new un-weathered galvanised steel, zinc or aluminium sheeting. As part of the Rustoleum 10 year warranty system it is recommended that the PDVF primer is applied before the first coat of Noxyde.
- Excellent adhesion on new or aged PVDF/PVF2 cladding
- Also suitable for galvanised steel, zinc, aluminium and hard plastics
- Tack-free after just 30 minutes
- Single pack, easy to use
- Primer for Metal Cladding Topcoat, NOXYDE ® and NOXYDE® Peganox
This single pack solvent based super adhesion primer has been formulated from modified vinyl resins that offer exceptional hydrophobic qualities (Cori test report ref. N/8384) as well as offering outstanding performance as an adhesion promoting primer to smooth and difficult to coat metal substrates.
Application
SURFACE PREPARATION
Remove grease, oil and all other surface contaminations by alkaline or high pressure cleaning in combination with appropriate detergents. Sand intact coatings to roughen the surface slightly. Remove zinc or aluminium corrosion with Surfa-Etch 108. The surface must be clean and dry.
DIRECTIONS FOR USE
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
APPLICATION CONDITIONS
Apply in a dry and well-ventilated area.
APPLICATION & THINNING: BRUSH - Do not dilute.
APPLICATION & THINNING: ROLLER - Do not dilute.
APPLICATION & THINNING: AIRLESS SPRAY - If necessary, dilute slightly with maximum 4% volume Thinner 22. Nozzle: 012 - 015 / Pressure: 180 - 200 bars.
APPLICATION & THINNING: AIR-ATOMISED SPRAY - If necessary dilute slightly with maximum 4% volume Thinner 22.
Notes
- Offers excellent adhesion
- Primer for smooth surfaces such as PVDF and PDVF2 cladding
- Suitable for galvanised steel, zinc, aluminium, etc.
- Cori test report ref. N/8384
- If necessary dilute slightly with max. 4% Thinner 22
Technical Info
| Components: | One Part |
| Type: | Solvent Based |
| Stock Colours: | Grey |
| Tintable: | No |
| Suitable Substrates: | For PVDF or PVF2, galvanised steel, zinc and aluminum |
| Cleaner / Thinner: | Rustoleum Thinner 22 |
| Shelf Life: | 5 years unopened |
| Packaging: | Available in 5 Litres |
| VOC Content: | 570.0g per Litre |
| Application Method: | Air Atomised Spray, Airless Spray, Brush&comma, Roller&comma |
| Theoretical Coverage: | 10 m2 per litre |
| Finish: | Satin |
| Touch Dry: | 30 mins at 20°C |
| Fully Cured: | 7 days at 20°C |
| Volume Solids: | 30% |
| Overcoatable: | After 24 hours at 20°C |
| Wet Film Thickness (WFT): | 100 microns |
| Dry Film Thickness (DFT): | 30 microns |
