Sherwin Williams Firetex FX2007 SB Intumescent

UN1263 (Class: 3, Pk Grp: II)
A single pack solvent-based thin film intumescent coating for up to 60 minutes on structural steel.
Available in 20 and 200 Litres in White
From £558.72 £465.60
In stock
Only %1 left
Product Description

Sherwin Williams Firetex FX2007 SB Intumescent is a single pack solvent based thin film intumescent coating.

Best Uses

Sherwin Williams Firetex FX2007 is designed for in-shop application by airless spray, to provide fire resistance for up to 60 minutes on structural steel.

After appropriate drying, Sherwin Williams Firetex FX2007 specifications can be exposed to the weather for up to 6 months provided that the specific use or storage does not lead to ponding water due to rainfall, condensation or other site / transportation / storage circumstances.

Recommended Primers

Recommended Topcoats


Sherwin Williams Firetex FX2007 is designed for use over a suitably prepared and primed substrate. Ensure surfaces to be coated are clean, dry and free from all
surface contamination. Under certain circumstances it may be possible to apply Sherwin Williams Firetex FX2007 directly to steel blast cleaned to a minimum standard of
Sa2½ BS EN ISO 8501-1:2007, surface profile in the range 50-100 microns. Consult our technical team for further details.

See data sheet for full application requirements.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details

Approvals & Certifications

  • Tested and assessed to EN13381-8 and BS EN13381-9
  • CE Mark Number: 2812-CPR-GA5055
  • European Technical Assessment: ETA-22/0352
  • Certifire Approved - Certificate CF6088

Technical Info

Components: Single Pack
Type: Intumescent
Stock Colours: White
Tintable: No
VOC Content: 272 g/L
Volume Solids: 75%
Suitable Substrates: Structural Steel
Application Method: Airless Spray
Theoretical Coverage: Dependent on Specification
Wet Film Thickness (WFT): Dependent on Specification
Dry Film Thickness (DFT): Dependent on Specification
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 15°C
Overcoatable: After 1 hour minimum at 23°C
Fully Cured: 4 hours at 15°C
Cleaner / Thinner: Sherwin Williams Thinner No2
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 20 and 200 Litres

Related Products