Sika Sikafloor® 3000

Part A and B: Non Hazardous
A 2 part elastic, aliphatic, low VOC, self-smoothing polyurethane resin, that part of the Sika ComfortFloor® range.
Available in 20 Kg. Tintable to a huge range of colours.
From £540.25 £450.21
In stock
Only %1 left
Product Description

Sika Sikafloor 3000 is a 2 part elastic, aliphatic, low VOC, self-smoothing polyurethane resin, that part of the Sika ComfortFloor® range.

Best Uses

Sika Sikafloor 3000 is an elastic smooth wearing course for Sika Comfortfloor® range. Formulated for decorative Sika floor finishes. Particularly suitable for hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan offices, museums and residential use. For interior use only.

  • Very low VOC emission
  • Solvent free
  • Comfortable
  • Footwarm
  • Reduces footfall sound
  • Permanently elastic
  • Good mechanical resistance
  • Very high yellowing resistance
  • Decorative designs possible using coloured chippings etc.
  • Easy to apply
  • Low maintenance finish


Self-smoothing system 2.0 mm: Sikafloor®-3000 is poured and spread evenly by means of a serrated trowel or pinrake. If desired broadcast slightly and evenly with Sikafloor® Colourchips. If during application locally some imperfections become visible, like pigment floatation, this local spot can be treated immediately with a spike roller to eliminate the imperfection.

Freshly applied Sikafloor® -3000 must be protected from damp, condensation and water for at least 24 hours. Uncured material reacts in contact with water (foaming). During application care must be taken that no sweat drops into fresh Sikafloor® -3000 (wear head and wrist bands) For exact color matching, ensure the Sikafloor® -3000 in each area is applied from the same control batch number.


Sika® ComfortFloor® Decorative

(PS24 - seamless resin floor ~ 2,0 mm):

Sika® ComfortFloor® Decorative Pro

(PS26 - seamless padded resin floor ~ 6,0 mm):

Sikafloor 3000 always needs to be sealed with Sika Sikafloor 304W.

Technical Details


  • Coating for concrete protection according to the requirements of EN 1504-2:2004 and the EN 13813:2002, DoP 0208120400200000251041 certified by Factory Production Control Body, 0620 and provided with the CE-mark.
  • Emission tested according to the AgBB-scheme and guidelines of the DiBt (AgBB – Committee for Health-related Evaluation of Building Products, DiBt – German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000, Eurofins Report No 392-2014-00156502_02.
  • Reaction to Fire classification according to DIN EN 13501-1 Class Bfl/S1 for Sika® ComfortFloor® Decorative system, report 14-529 Universiteit Gent.


Sika Sikafloor 3000 is used within the following Sika systems:

  • Sika Comfortfloor PS-64
  • Sika Comfortfloor PS-24
  • Sika Comfortfloor Decorative Pro PS-66

See Data Sheets tab for System sheet downloadable PDF.

Technical Info

  • Sikafloor 3000 always needs to be sealed with Sika Sikafloor 304W
  • 100% Solid
  • Sikafloor® -3000 is typically installed at 2,8 kg/m² giving a 2 mm nominal thickness.
  • The substrate and uncured floor must be at least 3°C above dew point to reduce the risk of condensation or blooming on the floor finish.
  • Clean all tools and application equipment with Thinner C immediately after use. Hardened and/or cured material can only be removed mechanically.
  • Material Temperature: +15°C min. / +30°C max
  • Pot Life at 20°C: Approx 90 minutes
  • Tintable to huge range of colours
  • Available in 20kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use