£9.95 delivery on orders excluding certain products & postcodes *
Sika Sikagard 850 Activator
SKU
ID23904
UN1993 (Class: 3, Pk Grp: III)
Part of the Sikagard Anti Graffiti Coating System.
Available in 4 kg tins
From
£473.11
£394.26
In stock
Only %1 left
Product Description
Sika Sikagard 850 Activator is part of the Sikagard anti graffiti coating system. It is a one part, ready to use adhesion promoting primer.
Best Uses
Sikagard 850 Activator is best used as an adhesion promoting primer on coated mineral substrates and wood, to improve application and adhesion of Sikagard 850 Clear.
Application
Application is by Brush, roller or airless spray. Always ensure that you strictly follow the installation procedures as defined in method statements, application manuals and working instructions, which must always be adjusted to the actual site conditions.
Important notes
On rough substrates, use a brush to apply the primer and make sure that it covers all the surface, including any voids. Do not over brush the primer as that could cause air bubbles which will affect the final finish.
Apply Sikagard®-850 Activator evenly over the prepared coating with either a brush or fleece roller or airless spray at the required consumption rate.
Existing coatings must be tested to confirm their compatibility with Sikagard®-850 Activator and Sikagard®-850 Clear top coat.
Technical Details
Features and Benefits
- Ready to use - no on-site dilution required
- Adhesion promoting primer
- Specifically used with Sikagard®-850 Clear
- Free of toluene and other aromatic solvents
System Information
- Primer for uncoated mineral substrates - Sikagard 850 Primer
- Primer for coated mineral substrates or wood - Sikagard 850 Activator
- Top Coat - Sikagard 850 Clear
Technical Information
| Components: | Single Pack |
| Type: | Adhesion Primer |
| Finish: | - |
| Stock Colours: | Clear yellowish liquid |
| Tintable: | No |
| VOC Content: | - |
| Volume Solids: | - |
| Suitable Substrates: | Coated mineral substrates such as coated concrete, masonry, cementitious render or wood |
| Application Method: | Brush, Roller, Airless Spray |
| Theoretical Coverage: | 50 to 100 g/m2 |
| Drying Time: |
Typically, 1-2 hours depending on weather conditions |
| Overcoatable: |
Do not exceed 5 hours after using the activator before applying Sikagard 850 Clear. |
| Cleaner / Thinner: | Clean tools with white spirit immediately after use |
| Shelf Life: | 9 months from date of production unopened |
| Packaging: | Available in 4 Kg tins |
Related Products
Sika Sikagard 850 Clear
A one part ready to use, permanent anti-graffiti and anti-fly poster coating. Part of the Sikagard Anti-graffiti system.
From
£227.74
£189.78
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
From
£2.34
£1.95
RODO All Purpose Paint and Varnish Paint Brush
A general contractor all purpose paint brush in various sizes.
From
£2.69
£2.24
Coo-Var WB101 Acrylic Anti Graffiti Paint
Two pack water based, graffiti protection - inside and out.
From
£251.17
£209.31
Coo-Var GP101 Graffiti & Flyposting Protection
A clear surface coating, in a matt or gloss finish, offering excellent protection against graffiti and poster vandalism.
From
£158.75
£132.29
Coo-Var P101 Anti-Graffiti Coating
A clear polyurethane coating which provides resistance against graffiti for walls and ceilings.
From
£251.17
£209.31
Coo-Var Anti-Graffiti GP101 Sealer Coat
Recommended for application prior to a Coo-Var Anti Graffiti Protection System on to porous surfaces.
From
£100.00
£83.33