£7.75 delivery on orders excluding certain products & postcodes *
Sika Sikagard 850 Primer
SKU
ID23903
UN1993 (Class: 3, Pk Grp: III)
Part of the Sikagard Anti Graffiti Coating System.
Available in 4 kg tins
£134.36
£111.97
In stock
Product Description
Sika Sikagard 850 Primer is part of the Sikagard anti graffiti coating system. It is a one part ready to use primer with low viscosity.
Best Uses
Sikagard 850 primer is best used as a primer on uncoated mineral substrates, to improve application and adhesion of Sikagard 850 Clear.
Application
Application is by Brush, roller or airless spray. Always ensure that you strictly follow the installation procedures as defined in method statements, application manuals and working instructions, which must always be adjusted to the actual site conditions.
Important notes
On rough substrates, use a brush to apply the primer and make sure that it covers all the surface, including any voids. Do not over brush the primer as that could cause air bubbles which will affect the final finish.
Apply Sikagard®-850 Primer evenly over the prepared coating with either a brush or long hair roller at the required consumption rate.
Technical Details
Certificates and Approvals
- CE Marking and Declaration of Performance (Ref.: 50264739) based on EN 1504-2:2004 Products and systems for the protection and repair of concrete structures — Surface protection systems for concrete — Coating.
Features and Benefits
- Low viscosity
- Ready to use - no on-site dilution required
- Adhesion promoting primer
- Specifically used with Sikagard®-850 Clear
- Applied by brush, roller or airless spray
System Information
- Primer for uncoated mineral substrates - Sikagard 850 Primer
- Primer for coated mineral substrates or wood - Sikagard 850 Activator
- Top Coat - Sikagard 850 Clear
Technical Information
| Components: | Single Pack |
| Type: | Primer |
| Finish: | - |
| Stock Colours: | Clear |
| Tintable: | No |
| VOC Content: | 500 g/l |
| Volume Solids: | - |
| Suitable Substrates: | Uncoated mineral substrates |
| Application Method: | Brush, Roller, Airless Spray |
| Theoretical Coverage: | 75 g/m2 to 125 g/m2 |
| Overcoatable: |
Typically, 2-3 hours depending on weather conditions, wait until the surface is tack free. |
| Cleaner / Thinner: | Clean tools with white spirit immediately after use |
| Shelf Life: | 12 months from date of production unopened |
| Packaging: | Available in 4 Kg tins |
